NDP-25 Pump
Request a Quote
Data SheetOverview
The design of the NDP-25 air operated double diaphragm pump provides high suction lift, even at dry startup and with heavier fluids (incorporating internal check valves). No close fitting or sliding parts are at risk – the pump can run dry without damage. Pumps will run at any setting within their operating range simply by adjusting the air inlet pressure and system conditions. One pump can fit a broad spectrum of applications. Pumps transport easily to the application site. No complex controls to install or operate, simply connect an air supply, attach fluid connections, and the pump is ready to perform.
Specifications
| 46.2 GPM Max. Port Dimensions |
Intake & discharge connection: Polypropylene (PPG) 1″ Female NPT Kynar® (PVDF) 1″ Female NPT Aluminum (ADC-12) 1″ Female NPT Stainless Steel (316) 1″ Female NPT Cast Iron 1″ Female NPT Air inlet (incl. ball valve): 3/8″ Female NPT Air exhaust (incl. silencer): 3/4″ Female NPT ANSI Flange also available—consult Yamada. |
| Maximum Liquid Temperature | Diaphragm Material Temperature Buna N 180°F (82°C) Neoprene 180°F (82°C) Santoprene® (TPO) 180°F (82°C) EPDM 212°F (100°C) PTFE 212°F (100°C) Hytrel® (TPEE) 248°F (120°C) Viton® fluoroelastomer 248°F (120°C) *The maximum liquid temperature for metal and Kynar®-fitted pumps is determined by the elastomer (diaphragm material). Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material. |
| Air Supply Pressure (All Models) | 20–100 PSI (1.4–7 kfg/cm) |
| Discharge Volume Per Cycle | Rubber diaphragm: 0.22 gallons (833 cc) PTFE diaphragm: 0.21 gallons (787 cc) |
| Maximum Cycles Per Minute | Rubber diaphragm: 210 PTFE diaphragm: 210 |
| Maximum Size Solid | 3/16″ (4.8 mm) |
| Maximum Dry Suction Lift | Rubber-fitted pump capability: 18-feet |
| Air Motor | Aluminum air motors are standard on metal pumps; glass-filled polypropylene air motors are standard on plastic and Kynar® pumps. |
| Optional | Split manifold—contact Yamada |
Features
- Outside Accessible Air Valve – inspection or maintenance can be performed without removing the pump from service
- Unified Air Valve Concept – common-size air valve assemblies reduce parts confusion & inventory
- Non-Lubricated Air Valve – reducing pumpage contamination and maintenance issues
- Pilot Valve – maintenance free modular pilot valve
- Rugged, Bolted Construction – eliminates leaks & simplifies post-maintenance reassembly.
- Diaphragm Dynamics – optimal stroke length maximizes diaphragm life & performance.
- Durable Foot & Base Support – designed to absorb weight distribution
