The design of the DP-10 & DP-15 air operated double diaphragm pump provides high suction lift, even at dry startup and with heavier fluids (incorporating internal check valves). No close fitting or sliding parts are at risk – the pump can run dry without damage. Pumps will run at any setting within their operating range simply by adjusting the air inlet pressure and system conditions. One pump can fit a broad spectrum of applications. Pumps transport easily to the application site. No complex controls to install or operate, simply connect an air supply, attach fluid connections, and the pump is ready to perform.
| DP-10 Port Dimensions (6 GPM Max) |
| DP-10 Port Dimensions (6 GPM Max) | Polypropylene (PPG) 3/8″ Female NPT Aluminum (ADC-12) 3/8″ Female NPT Stainless Steel (316) 3/8″ Female NPT |
| DP-15 Port Dimensions (7.4 GPM Max.) | Intake & discharge connection: Polypropylene (PPG) 1/2″ Female NPT Groundable Acetal 1/2″ Female NPT |
| Air Inlet /Exhaust | Air inlet (incl. ball valve): 1/4″ Female NPT Air exhaust (incl. silencer): 3/8″ Female NPT |
| Maximum Liquid Temperature | Diaphragm Material Temperature Buna N 180°F (82°C) Neoprene 180°F (82°C) Santoprene® (TPO) 180°F (82°C) PTFE 212°F (100°C) Hytrel® (TPEE) 248°F (120°C) Viton® fluoroelastomer 248°F (120°C) |
| Air Supply Pressure (All Models) | 20–100 PSI (1.4–7 kfg/cm) |
| Discharge Volume Per Cycle | DP-10: 0.020 gallons (76 cc) DP-15: 0.025 gallons (93 cc) |
| Maximum Cycles Per Minute | All diaphragms: 300 |
| Maximum Size Solid | 1/32″ (1 mm) |
| Maximum Dry Suction Lift | All diaphragms: 10-feet |
| Air Motor | Aluminum Air Motor–Standard Optional coating: PTFE grey coated (XP) |
